Chrome Housing Clear Headlights Assembly For Chevr Tahoe 2007-2014 Generic

Feature:

1.A new pair of headlights from ours allow you to see the road in front of you clearly during the night and in any bad weather

that may arise.

2.Gives you and your family safer nighttime driving.

3.Makes your car looks newer.

4.See road markings and traffic sighs better.

5.Driving at night can be a scary proposition - and it's even scarier if you can't see the road well.

6.A dim, cloudy, yellowed, or otherwise damaged or non-functioning headlight makes driving dangerous,not only is your own

safety at risk, but the safety of others is as well.

7.Great Replacement or upgrade for factory headlights

8.Adjustment screws for high/low beam

Specifics:

Condition: 100% Brand New

Color: Chrome Housing Clear Lens

Material: Plastic Housing / Polycarbonate Lens

Fitment Type:Direct Replacement

Placement on Vehicle:Front, Left, Right

Manufacturer Part Number: ?165904-5261-1620184221

Interchange Part Number:?165904-5261-1620184221

Other Part Number:?1221-0120L 1221-0120R 22853025 22853026 GM2502263 GM2503263

Assembly Type:Composite

Housing Color:Chrome

Lens Color:Clear

Bulb Type: Halogen/Led; High Beam:9005,Low Beam:H11,Signal Light:4157NA(Bulbs Not Included,Please Be Aware)

Fitment:

For Chevr Avalanche Base Crew Cab Pickup 4-Door 2007-2013

For Chevr Avalanche Black Diamond LS Crew Cab Pickup 4-Door 2013

For Chevr Avalanche Black Diamond LT Crew Cab Pickup 4-Door 2013

For Chevr Avalanche Black Diamond LTZ Crew Cab Pickup 4-Door 2013

For Chevr Avalanche LS Crew Cab Pickup 4-Door 2007-2012

For Chevr Avalanche LT Crew Cab Pickup 4-Door 2007-2012

For Chevr Avalanche LTZ Crew Cab Pickup 4-Door 2007-2012

For Chevr Suburban 1500 Base Sport Utility 4-Door 2007-2012

For Chevr Suburban 1500 LS Sport Utility 4-Door 2007-2014

For Chevr Suburban 1500 LT Sport Utility 4-Door 2007-2014

For Chevr Suburban 1500 LTZ Sport Utility 4-Door 2007-2014

For Chevr Suburban 1500 Z71 Sport Utility 4-Door 2007

For Chevr Suburban 2500 Base Sport Utility 4-Door 2009

For Chevr Suburban 2500 LS Sport Utility 4-Door 2007-2013

For Chevr Suburban 2500 LT Sport Utility 4-Door 2007-2013

For Chevr Suburban 2500 LTZ Sport Utility 4-Door 2007

For Chevr Tahoe Base Sport Utility 4-Door 2007-2009 2011-2012

For Chevr Tahoe Hybrid Sport Utility 4-Door 2008-2013

For Chevr Tahoe LS Sport Utility 4-Door 2007-2014

For Chevr Tahoe LT Sport Utility 4-Door 2007-2014

For Chevr Tahoe LTZ Sport Utility 4-Door 2007-2014

For Chevr Tahoe PPV Sport Utility 4-Door 2012-2014

For Chevr Tahoe SSV Sport Utility 4-Door 2012-2014

For Chevr Tahoe Z71 Sport Utility 4-Door 2008-2009

Package Include:

1 Pair of Headlights (Driver & Passenger Side)

Note:

1.Please check whether this item can fit on your car before purchasing.

2.Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

TIPS:

??.Installation:

1.Undo the screws, clips, or retainer springs that hold the headlight in place.

2.Disconnect the wiring from the assembly.

3.Detach the headlight from the vehicle to replace it with a new one.

4.Fit in the new headlight assembly.

5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.

6.Reconnect the wiring that was unplugged from the assembly.

7.Put back the grille and other components that you removed. Seal them back into place.

8.Test the new assembly.

??.Adjustment:

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet

from the wall with the lights aimed at the wall. The center lines of the headlights should not be any higher than 3.5 feet above

the ground.

1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.

2. Adjust the headlight individually. The headlights should be adjusted one at a time. Put a rag or towel

over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the

lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the

light beam shines directly on or just below the center of the tape line on the wall.

4. Test your results

??.Adjustment:

Condensation buildup inside a headlight assembly is normal, and it occurs for a number of reasons.Condensation does not mean

that a headlight assembly is defective,After hot, pressurized air has worked its way out of the headlight through the vents, humidity

can get drawn in from the outside. So, headlights that have been on during hours of driving become fogged on the inside because

their cool temperature creates a low-pressure area that actually draws moisture in.To minimize condensation buildup inside the

headlight, make sure any dust boots or covers are on tightly. Also make sure that the headlight vents are not blocked, which could

prevent condensation from escaping.

If water collects inside your headlight to the point where puddles form, odds are you've got a crack in the headlight lens cover. Water

can also leak in because of improper seals around dust boots where bulbs are inserted. If no cracks or holes are visible around the

edges of the headlight, the problem could be the housing itself. If you can visibly locate a crack, it's best to repair it with sealant.

Shipping:
Free Shipping
Item location: Los Angeles, California warehouse
Delivery Time: 2-6 working days

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems