18-Pole Magneto Generator Stator For Yamaha YBR125ED 2007-2014 YB125SPD 2008

FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number: 3D9-H1410-10, 3D9-H1410-12

Dimensions :
Interior diameter : 36.8mm / 1.44 in
Exterior diameter : 92mm / 3.62 in
Pole's Thickness : 26.5mm / 1.04 in
Pole's Width : 11mm / 0.43 in

Other specifications :
Number of wires: 6
Number of plugs: 2
Number of pins: 2 + 3 + 1 (+1)
Number of fixation holes: 3
Number of poles: 18

Replacement Part Number:
3D9-H1410-10
3D9-H1410-11
3D9-H1410-12

FITMENT:
Fit for Yamaha YB125SPD 2008
Fit for Yamaha YBR125ED (3D9) 2007-2009
Fit for Yamaha YBR125ED (51D) 2010-2014

PACKAGE INCLUDED:
1x Generator Stator Coil

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.